Browse repository
Stratigraphic group
721-730 of 760 results
 70 / 71 / 72 / 73  / 74 / 75 / 76 
    Previous / Next    
ID  2210  -  Public access
Description :   UE235. Cut of circular shape in plan, approximately 22 cm in diameter with a maximum depth of 7 cm. The break at the mouth of the hole is abrupt, while at the base it is more gradual. This is concave and circular, about 14 cm in diameter. It has no orientation or inclination. It was excavated in UE249 and contains UE218.
Stratigraphic group:  Tomb 2
[See more]
ID  2212  -  Public access
Description :   UE202. Fill of earth with a circular shape in plan, gray in the center and brown on the perimeter. The central grayish zone is more organic and finer grain than the brown, which is more mineral and sandy. It was documented in the SE quadrant of tomb T2, and has a diameter of 20 cm and a thickness of 11 cm. Partially destroyed by the excavation of tomb T1.
Stratigraphic group:  Tomb 2
[See more]
ID  2213  -  Public access
Description :   UE219. Cut with an almost circular shape in plan, 18 cm in diameter (partially destroyed by the excavation of tomb T1), and 13 cm in depth. The walls fall inwards at an angle of about 100. The base is circular in plan, 8 cm in diameter, concave, and without orientation. The mouth-wall and wall-base ruptures form an angle greater than 90º, giving the hole the appearance of a cone. It was excavated in UE249 and contains UE202.
Stratigraphic group:  Tomb 2
[See more]
ID  2214  -  Public access
Description :   UE203. Fill of earth of almost circular morphology in plan, gray in the center and brown on the perimeter. The matrix is more organic than mineral and appears in the SW quadrant of tomb T2. It has visible dimensions of 25 x 15 cm (SW-NE x NW-SE), and a maximum thickness of 15 cm (counted from the point at which the deposit is defined in plan). It is partially described in the S-SE profile of tomb T2, observing that it would have another 36 cm (total, 51 cm). Not completely defined in plan, the deposit is partially at the boundary of the excavation towards the SE.
Stratigraphic group:  Tomb 2
[See more]
ID  2215  -  Public access
Description :   UE220. Cut of semicircular shape in plan that seems to continue towards the SE profile of tomb T2. The visible surface protrudes 15 cm from the profile and is 16 cm deep. The walls fall inwards at an angle of about 100º to the base, which is semicircular and flat. The wall-base rupture is abrupt, almost forming a right angle. No orientation can be seen as it is partially excavated. It was excavated in unit UE249. Contains UE203.
Stratigraphic group:  Tomb 2
[See more]
ID  2216  -  Public access
Description :   UE204. Fill of earth with an almost circular morphology in the plan, gray in the center and brown on the perimeter, the matrix is more organic than mineral. It appears in the SW quadrant of tomb T2 and has dimensions of 23 x 17 cm (SW-NE x NW-SE) and a maximum thickness of 18 cm (counted from the point at which deposit is defined on the ground). It is partially described in the S-SE profile of tomb T2, observing that it would have another 26 cm (total, 44 cm). It is not completely defined in plan. The deposit is partially on the boundary of the excavation towards the S.
Stratigraphic group:  Tomb 2
[See more]
ID  2217  -  Public access
Description :   UE221. Cut of semicircular shape in plan that seems to continue towards the SE of tomb T2. The visible surface protrudes 22 cm from the profile and is 18 cm deep. The walls fall inwards at an angle of about 100º until they reach the base, which is oval and concave, 8 x 5 cm. The wall-base rupture is smooth. No orientation can be seen. It was excavated in unit UE249 and contains unit UE204.
Stratigraphic group:  Tomb 2
[See more]
ID  2218  -  Public access
Description :   UE205. Fill of earth with an almost circular morphology in plan, gray in the center and brown around the perimeter, the matrix is more organic than mineral. It appears in the SE quadrant of tomb T2, and has visible dimensions of 19 x 8 cm (E-W x N-S) and a maximum thickness of 6 cm (counted from the point at which the deposit is defined on the ground). It is partially described in the S-SE profile of tomb T2, observing that it would have another 47 cm (total, 53 cm). Not completely defined in plan, the fill is partially on the boundary of the excavation towards the SE.
Stratigraphic group:  Tomb 2
[See more]
ID  2219  -  Public access
Description :   UE222. Cut of semicircular shape in plan that seems to continue towards the SW of tomb T2. The visible surface protrudes 18 x 8 cm (E-W x N-S) from the profile and is 7 cm deep. The walls fall inwards at an angle of about 100º to the base, which is semicircular and concave. The wall-base rupture is smooth, with the appearance of a cone. No orientation is seen. It was excavated in unit UE249 and contains unit UE205.
Stratigraphic group:  Tomb 2
[See more]
ID  2220  -  Public access
Description :   UE206. Fill of earth with an almost circular morphology in plan, gray in the center and brown around the perimeter, the matrix is more organic than mineral. It appears in the quadrant W of the T2, and has visible dimensions of 21 x 16 cm (NW-SE x NE-SW) and a maximum thickness of 10 cm (counted from the point at which the deposit is defined on the ground). It is partially described in the S-SW profile of tomb T2, observing that it would have another 24 cm (total, 34 cm). Not completely defined in plan, the deposit is partially on the boundary of the excavation towards the W.
Stratigraphic group:  Tomb 2
[See more]
721-730 of 760 results  
 70 / 71 / 72 / 73  / 74 / 75 / 76 
    Previous / Next    
"Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0. International license."